Mobeye ThermoGuard TwinLog CML2275, Руководство пользователя

Страница: 21 / 36

20
6.3 IDENTIFICATION TEXT
It is possible to add a standard identification text (NAME) to all messages sent out by
the Mobeye CML2275. The alarm messages are a combination of the name and the
alarm text. A user defined identification has a length of maximum 20 characters. The
default identification text is
‘Mobeye’.
SMS command identification text:
NAME:
example: 1111 NAME:my Mobeye device
6.4 ALARM TEXTS
Unique alarm texts can be programmed into the Mobeye CML2275. User defined texts
have a maximum length of 20 characters.
Following default texts are programmed:
Text 1 (low temperature 1 alarm):
Temperature 1 too low:
Text 2 (high temperature 1 alarm): Temperature 1 too high:
Text 3 (temperature 1 restored): Temperature 1 OK
Text 4 (low temperature 2 alarm): Temperature 2 too low:
Text 5 (high temperature 2 alarm): Temperature 2 too high:
Text 6 (temperature 2 restored): Temperature 2 OK
Text 7 (input 1): Alarm 1
Text 8 (input 2): Alarm 2
Text 9 (power failure): Power failure
Text 10 (power restoration): Power restored
NB: text 9 and 10 are only valid at POWERMESSAGE set to
‘ALARM’.
SMS command text low temperature 1 alarm: TEXT1:
SMS command text high temperature 2 alarm: TEXT2:
Similar for TEXT3 ... TEXT10
example: 1111 TEXT4:freezer too cold
6.5 SMS ON/OFF
By default, the Mobeye CML2275 sends alarm notifications via text message and calls
(you will hear a beep signal) to the preset contact persons. By turning off the SMS, the
unit will only call after a triggered input.