20
9.
SYSTEM RESET AND SYSTEM FEEDBACK
9.1
SYSTEM RESET
To reset a Mobeye CM4410 two steps are necessary, in following sequence:
1. Delete the Mobeye CM4410 from the Mobeye Internet Portal (if relevant)
2. Reset the Mobeye GSM fire alarm communicator CM4410
1. To delete the Mobeye CM4410 from the Mobeye Internet Portal
If connected to the Mobeye Internet Portal, first delete the device from the Portal.
The SIM card could be then reused for another Mobeye device, or the same device
can be connected again.
In the device list, click the name of the device to go to the details screen. Next
choose ‘Device’. Click ‘delete’ to delete
the device and confirm the option.
The SIM card will be disconnected from the device and visible on the first screen.
2. To reset the Mobeye CM4410
To reset the Mobeye CM4410 to its factory settings:
1.
Be sure the GSM module is in program mode.
2.
Send following SMS text message to the telephone number in the unit
(without CODE)
SMS command Reset:
RESET
3.
The green LED blinks 3x to indicate a successful command. In case of an
incorrect command the LED flashes 5x green.
After a successful reset, the LED will blink green to indicate that the module is not
configured. The security code is back to factory settings as well.
