9
Device Settings
The device settings can be changed via the Mobeye Internet Portal. To do this, click
on the "edit" icon and type in the security code (factory setting is "1111"). See
chapter 5 for the description per setting.
After saving the new settings, they must be retrieved by the device (synchronized).
See
Fout! Verwijzingsbron niet gevonden.
for more information about
synchronizing.
The device data contain the name and location of the device and can be changed
here. These texts are mentioned in every text message and e-mail message to
indicate the device. A free text is available as an internal comment field. This is not
included in reports.
Alarm dispatch
In the block "Contacts for messages" you link the contact persons who receive
alarm and service messages via push notification, call, text message and/or e-mail.
Service messages can be warnings about missed test messages and low battery
voltage.
To add a contact person, first create it as a contact. This can be done via the
+
or
in the main menu under the blue Contacts tab.
Tips:
- The alarm messages (including the voice call) consist of a combination of the
name, location and message text.
- Always insert a contact to receive service messages by e-mail.
- Assign calls and text messages only after the test phase in order to save credits.
Message texts
The message texts contain the texts that, in addition to the name and location, are
included in the messages. These texts can be adapted to your own text.
