10
5.
POSSIBLE SETTINGS
The Mobeye fire alarm communicator CM4410 has setting options that influence
the behaviour of the module. If connected on the Mobeye Internet Portal, the
settings are prepared in the portal (see chapter 4). If your own SIM card is used,
programming is done via SMS commands (see chapter 3).
5.1
ALARM PHONE NUMBERS
When using Mobeye Internet Portal: an unlimited number of contacts can receive
the alarm messages. These are set in the portal.
When using your own SIM card: the Mobeye CM-Guard can inform 5 telephone
numbers in the event of an alarm. It is mandatory to set at least one number
(TEL1). The numbers set are used for the telephone calls and/or SMS messages
from the unit.
5.2
TEST MESSAGE
When using the Mobeye Internet Portal: The Mobeye GSM fire alarm communica-
tor CM4410 can send regular test messages (
keep alive
) to the Mobeye Internet
Portal, to ensure the proper functioning of the unit. The test message will also be
sent if the unit is disarmed. The Mobeye Internet Portal expects the test message
and checks the timely receipt. The monitoring of the test messages follows the
‘management by exception’ rule: only i
f the m
essage was not received, the ‘service’
contacts will receive a notification.
The timing of the test message can be programmed. Since new settings (options)
will be synchronised after the test message, setting a specific time of the test
message can help the process of remote programming. Example: if you force a
daily test message at 17.30 hrs, you can prepare new settings and be sure they are
loaded into the device before the evening.
The interval between the test messages can be set between 0 days (no test
message) and 30 days. The default test interval is set to "7" (weekly test message).
