The mast can be adjusted to an offset value that is setup in the mast reference
offset (RO1 and R 2).To set the offset value
O
;
1) P
the [REF] button from
.
ress
the mast working screen
2) S
down using the [AUX2] down arrow
croll
to select either RO1 or RO2.
3) P
the [ENTER] button
to be made
ress
to enable changes in value
.
4) O
using [AUX2] down
nce the value for RO1 and RO2 are set, scroll down
arrow to
and press [ENTER]
the menu button
exit
or simply press
to go back to
the mast working screen.
T
;
o adjust the mast height by RO1 offset
1) P
[REF] button then
the [AUX2] up or down arrow key
ress and hold
press
once
.
to increase or decrease the mast height
2) U
[REF] button
o
pon the release of the
the mast will move up or down t a
value equal to RO1 offset.
T
multiple of RO1
;
o adjust the mast height by
offset
1) P
the [REF] button then
the [AUX2] up or down arrow
ress and hold
press
key multiple times.
2) Upon the release of the [REF] button, the mast will move up or down at a
value equal to RO1 offset multiplied by the number of times the [AUX2] up or
down arrow key was pressed. A maximum of 7 presses can be made.
Adjusting the mast height by RO2 offset is the same procedure as with adjusting
the mast height by RO1 offset.
5.5.4 RELATIVE OFFSET
5.5.4.1
USING THE PANEL KEYS
001
No
MAST
MAST mm
Ref4=+000
R1=+0008
R2=+0000
R1=+0008
R2=+0000
RO1=0020
RO2=0010
REF
+
-
AUX 2
figure 51
