4.4.4 TO ZERO REFERENCE/OFFSET VALUE
Use
key to highlight the reference, then press
key to edit the
[AUX2]
[ENTER]
Ref
. Press the
Up and D
n keys together to zero the Ref value.
value
[AUX2]
ow
The currently selected Ref can also be adjusted from the Standard Screen
without entering Ref menu. Simply
Up or D
n key to adjust the
press [AUX2]
ow
value. Proviso is that the function of the Aux keys has been selected through the
menu for this purpose..
Ref3=+0.00
Ref4=+2.50
Ref3=-1.52
Ref4=+2.50
Press up and down
keys together
to zero Ref value.
4.5 HYDRAULICS L/R FOR SLOPE SENSOR
To invert the sign of the current grade offset from positive to negative or vice
versa, press the
key. The inverted offset will be highlighted.
[REF]
This feature is intended to allow the operator to continue grading the same slope
after doing a U-turn with minimal readjustments. Available only for slope sensors.
Laser [mm]
-1.52
MAN AUTO
Laser
ON
Ref4= 2.50
Ref= 000
Slope [%]
Laser [mm]
-1.52
MAN AUTO
Laser
ON
Ref4= -2.50
Ref= 000
Slope [%]
REF
+
-
AUX 2
figure 32
figure 33
