MLB-S-BGS2-BW Terminal User Guide
32
Rev 1.3
5.8 Command Explanation
5.8.1
AT^SICS Internet Connection Setup
AT^SICS=
<conProfileId>
,
<conParmTag>
,
<conParmValue>
< conProfileId >
(num)
0...5
Internet connection profile identifier.
The <conProfileId> identifies all parameters of a connection profile, and when a service
profile is created with AT^SISS the <conProfileId> needs to be set as "conId" value of the
AT^SISS parameter <srvParmTag>.
< conParmTag >
(str)
Internet connection parameter
"conType"
Type of Internet connection.
For supported values of <conParmValue> refer to <conParmValue-con-Type>.
"alphabet"
Selects the character set for input and output of string parameters within a profile.
The selected value is bound to the specific profile. This means that different
profiles may use different alphabets. Unlike other parameters the alphabet can be
changed no matter whether the <conParmTag> value "conType" has been set.
For supported values of <conParmValue> refer to <conParmValuealphabet>.
"user"
User name string: maximum 31 characters (where "" is default).
"passwd"
Password string: maximum 31 characters (where ***** is default).
"apn"
Access point name string value: maximum 99 characters (where "" is default).
"inactTO"
Inactivity timeout value in seconds: 0 ...
2
16
-1, default = 20
Number of seconds the bearer remains open although the service no longer needs
the bearer connection.
Do not set the timeout value below 3 sec. This may result in problems when using
the <eodFlag> (set in the last AT^SISW command to terminate an upload data
stream).
"calledNum"
Called BCD number.
"dataType"
Data call type.
For supported values of <conParmValue> refer to <conParmValuedataType>.
Содержание MLB-S-BGS2-BW
Страница 55: ...MLB S BGS2 BW Terminal User Guide 55 Rev 1 3 Notes...
Страница 56: ...MLB S BGS2 BW Terminal User Guide 56 Rev 1 3...