MLB-S-BGS2-BW Terminal User Guide
39
Rev 1.3
- "keepcnt": specifies the TCP parameter TCP_KEEPCNT (see RFC1122; not for
Transparent UDP client); ignored if option "keepidle" is not set
range: 1...[9]...127
- "keepintvl": specifies the TCP parameter TCP_KEEPINTVL (see RFC1122; not for
Transparent UDP client); ignored if option "keepidle" is not set
range: 1...[75]...255 seconds
- "autoconnect" (for Transparent TCP Listener service only):
0 ... disabled (default) 1 ... automatically accept incoming client connects
- "connecttimeout": specifies the time after which incoming client connects are rejected
automatically (for Transparent TCP Listener service only)
range: 1...[30]...180 seconds
- "addrfilter": This option allows to filter incoming client connects based on the IP address of the
client (for Transparent TCP Listener service only).
It is possible to specify a maximum of 3 filters separated by commas.
Each filter is specified as 4 numbers separated by dots("<n>.<n>.<n>.<n>"). Each number n
can be in the range between 0 and 254. It is allowed to use the wildcard "*" instead of n which
matches all. The IP address of any incoming client connect does not match any of the
specified filters, then the connect is rejected automatically. If the option is not specified, then
all client connects are allowed.
Example: "addrfilter=10.10.0.*,80.190.158.9" - allows connects from 10.10.0.81 and
80.190.158.9 but not from 10.10.17.81 and 80.190.158.10.
3. FTP
- FTP client URL (get)
"ftp://<user>:<passwd>@<host>:<tcpPort>/<url-path> [;type='a|i|d'] " Refer to
"IETF-RFC 1738".
- FTP client URL (put)
"ftpput://<user>:<passwd>@<host>:<tcpPort>/<url-path>/<element name>
[;type='a|i'][;mode='u|a|d'] "
Used parameters:
<host> is mandatory, all other parameters are optional.
If <passwd> is set then <user> must be set as well.
Содержание MLB-S-BGS2-BW
Страница 55: ...MLB S BGS2 BW Terminal User Guide 55 Rev 1 3 Notes...
Страница 56: ...MLB S BGS2 BW Terminal User Guide 56 Rev 1 3...