MKS Micro-Baratron 870B, Инструкция по эксплуатации, Страница: 2 / 68

WARRANTY
Type 870B/872B Equipment
MKS Instruments, Inc. (MKS) warrants that for two years from the date of shipment the equipment described
above (the “equipment”) manufactured by MKS shall be free from defects in materials and workmanship and will
correctly perform all date-related operations, including without limitation accepting data entry, sequencing, sorting,
comparing, and reporting, regardless of the date the operation is performed or the date involved in the operation,
provided that, if the equipment exchanges data or is otherwise used with equipment, software, or other products
of others, such products of others themselves correctly perform all date-related operations and store and transmit
dates and date-related data in a format compatible with MKS equipment. THIS WARRANTY IS MKS’ SOLE
WARRANTY CONCERNING DATE-RELATED OPERATIONS.
For the period commencing with the date of shipment of this equipment and ending two years later, MKS will, at
its option, either repair or replace any part which is defective in materials or workmanship or with respect to the
date-related operations warranty without charge to the purchaser. The foregoing shall constitute the exclusive and
sole remedy of the purchaser for any breach by MKS of this warranty.
The purchaser, before returning any equipment covered by this warranty, which is asserted to be defective by the
purchaser, shall make specific written arrangements with respect to the responsibility for shipping the equipment
and handling any other incidental charges with the MKS sales representative or distributor from which the
equipment was purchased or, in the case of a direct purchase from MKS, with the MKS home office in Andover,
Massachusetts, USA.
This warranty does not apply to any equipment which has not been installed and used in accordance with the
specifications recommended by MKS for the proper and normal use of the equipment. MKS shall not be liable
under any circumstances for indirect, special, consequential, or incidental damages in connection with, or arising
out of, the sale, performance, or use of the equipment covered by this warranty.
MKS recommends that all MKS pressure and flow products be calibrated periodically (typically every 6 to 12
months) to ensure accurate readings. When a product is returned to MKS for this periodic re-calibration it is
considered normal preventative maintenance not covered by any warranty.
THIS WARRANTY IS IN LIEU OF ALL OTHER RELEVANT WARRANTIES, EXPRESSED OR IMPLIED,
INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS
FOR A PARTICULAR PURPOSE, AND ANY WARRANTY AGAINST INFRINGEMENT OF ANY PATENT.
11-98 123655-P1
This warranty is void if the product is installed using single or double metal ferrule compression
type vacuum fittings, shown below. These fittings are commonly tightened incorrectly, causing
damage to the pressure sensor.
SPECIAL NOTICE
Single Ferrule Double Ferrule