MKS Baratron 622D, Руководство пользователя

Страница: 25 / 59

Chapter Two: Installation How To Unpack
19
Chapter Two: Installation
How To Unpack
MKS has carefully packed the Type 622D/623C/626D unit so that it will reach you in perfect
operating order. Upon receiving the unit, however, you should check for defects, cracks, broken
connectors, etc., to be certain that damage has not occurred during shipment.
Note
Do not discard any packing materials until you have completed your
inspection and are sure the unit arrived safely.
If you find any damage, notify your carrier and MKS immediately. If it is necessary to return the
unit to MKS, obtain an RMA (Return Material Authorization) Number from the MKS Service
Center before shipping. Please refer to the inside of the back cover of this manual for a list of
MKS Calibration and Service Centers.
Unpacking Checklist
Standard Equipment:
•
The Type 622B, 623H, or 626D Absolute Pressure Transducer (specified at time of order).
•
The Types 622D and 623H transducers come with a mating connector for the transducer’s
terminal block connector(s).
Optional Equipment:
The Types 622B, 623H, and 626D transducers are compatible with:
•
Most MKS Pressure, Flow, Flow Ratio, and Throttling Valve Controllers
•
Most MKS Power Supply/Readouts
•
Optional RM-6 rack mount kit permits mounting one or two Readouts and/or Controllers in a
19” rack
•
Appropriate cables (Refer to Interface Cables , page 20, for information.)
•
Electrical Connector Accessories Kit, 626B-K1