MKN London 1, Руководство по эксплуатации

Страница: 30 / 40

Cleaning and caring for the unit
30 Operating instructions
5.2 Removing rust spots
• Remove fresh rust spots with a mild abrasive or fine sandpaper.
• Always remove rust spots completely.
• Expose treated areas to fresh air for at least 24 hours. During this
time, do not allow any contact with greases, oils or foods so that a
new protective layer can form.
5.3 Cleaning the housing
Requirement Unit switched off and cooled down
Clean the housing with warm water and commercially available
washing-up liquid.
5.4 Cleaning the deep-frying basin
Requirements Deep-frying oil emptied
Unit switched off and cooled down
1. Close the drain.
2. Place a suitable collection container underneath.
3. Remove the deep-frying basket.
4. Swing the heating element out with the swivel mechanism control
lever and engage it in position.
5. Lift the oil clarity insert carefully out of the deep-frying basin and
empty it.
6. Thoroughly clean the deep-frying basin, deep-frying basket and oil
clarity insert with warm water and mild cleaning agent.
7. Let the cleaning water drain away.
8. Rinse with clear water and then dry.
9. Clean and dry the drain and drain pipe thoroughly with a bottle
brush.
10.Empty the collection container.
11.Hook in the oil clarity insert.
12.Lift the heating element slightly with the swivel mechanism control
lever and then fold in the swivel mechanism locking lever.
13.Swing the heating element back into the deep-frying basin with the
swivel mechanism control lever.
14.Insert the deep-frying basket.
15.Place the lid on.
2020321-20ABBE-C