MKN HLEFRIL2-HU, Руководство по эксплуатации

Страница: 27 / 36

Cleaning and caring for the unit
27 Operating instructions
5.4 Cleaning the heating element
Requirements Deep-frying oil emptied
Unit switched off and cooled down
Deep-frying basket removed
Lifting arm removed from the lifting cylinder
1. Close the drain.
2. Place a suitable collection container underneath.
3. Load in the water up to the
Maximum fill level
mark.
4. Switch on the unit and heat the water to 90 °C.
5. Switch off the unit.
6. Allow incrustation to soak for approx. 30 minutes.
Add several drops of commercially available cleaning agent.
7. Open the drain slowly and let the water run into the collection
container.
8. Close the drain.
9. Swing the heating element out with the swivel mechanism control
lever
The swivel mechanism locking lever engages.
The heating element cools down.
10.Clean the heating element with a soft brush, warm water and a
commercially available cleaning agent.
11.Rinse with clear water and then dry thoroughly.
12.Open the drain slowly and let the water run into the collection
container.
13.Clean the deep-frying tank (see "Cleaning the deep-frying tank").
14.Lift the heating element slightly with the swivel mechanism control
lever.
15.Fold in the swivel mechanism locking lever.
16.Swing the heating element back into the deep-frying basin with the
swivel mechanism control lever.
5.5 Cleaning the deep-frying tank
Requirements Deep-frying oil emptied
Unit switched off and cooled down
1. Close the drain.
2. Place a suitable collection container underneath.
3. Remove the deep-frying basket.
4. Remove the lifting arm from the lifting cylinder.
5. Swing the heating element out with the swivel mechanism control
lever and let it engage.
6. Lift the oil clarifying tray carefully out of the deep-frying tank and
empty it.
7. Thoroughly clean the deep-frying tank, deep-frying basket and oil
clarifying tray with warm water and a mild cleaning agent.
2020325A21ABBE-A