MKN HansDampf 10.1, Руководство по обслуживанию

Страница: 36 / 72

Service manual
Relay
no. Relay name Description if START/STOP is pressed.
r15
Gas on 2
(Only gas version)
Ignition controller N20 via X4.9 The glow plug R20 is activated.
R16
WaveClean pump
(option)
The relay energizes via X10.5 the pump M16. The water of the
siphon is being pumped into the cooking chamber (Can be dirty!)
Caution! Only do the procedure when the cooking chamber
is cold! The chamber could be damaged.
r20
LOA B or D1 of the
frequency controller
gas versions Electric version:
Possibility of connecting an Energy optimisation system to the
unit (X2, connector B)
Gas version:
Entry D1 of the frequency controller is driven via X9.4 with
(120-230V). The fan runs in right direction.
r21
Gas Reset 2
(Only gas)
Reset signal from X4.3 to ignition box N20
r22
Gas Reset 1
(Only gas)
Reset signal from X4.2 to ignition box N10
r23
Reserve relay If the reserve relay is not used the LED on the Flexi button is lit.
(Output X9.9, see also rewiring instructions)
r24
Siphon Pump
(option)
The relay energizes via X10.6 the pump M24. Water is being
pumped out of the siphon into the drain.
36