
Service manual
Continuation Description WaveClean II
Step by step description
Step
Description
01
-
Depending on exit temperature the chamber cooling down to 55°C (131°F)
02
-
Cleaning of the siphon by water exchange. The pump M24 pumps out the water from
the siphon. The siphon gets filled with water about the solenoid valve Y12. This
process recurs repeatedly. This process serves for cleaning the siphon.
03
-
Double pre-cleaning of the chamber by changing the water radically above pump
M16.
04
-
Cleaning starts after a time of 6 minutes. The chamber heated at the same time . The
cleaner activates at a temperature of 70°C (158°F). A cancellation of the cleaning
process is not possible in this phase!
05
-
Execution of cleaning. The fan runs in right/left direction. The pump M16
permanently changes the water radically. The running time depends on the chosen
cleaning program.
06
-
Cleaning of the siphon by water exchange. The pump M24 pumps out the water from
the siphon. The siphon gets filled with water about the solenoid valve Y12. The
process recurs repeatedly. This process serves for cleaning the siphon. Fresh water is
changed radically over the pump M16 to rinse the chamber. The fan runs in right/left
direction.
07
-
The chamber heats up to 92°C (198°F). The rinse wax layer smelting now. The rinse
granulate falls into the chamber now. A cancellation of the cleaning process is not
possible in this phase!
08
-
The rinsing program starts. The fan runs in right/left direction. The pump M16
permanently changes the water radically. The running time depends on the chosen
cleaning program.
09
-
Cleaning of the siphon by water exchange. The pump M24 pumps out the water from
the siphon. The siphon gets filled with water about the solenoid valve Y12. This
process recurs repeatedly. This process serves for cleaning the siphon. Fresh water is
changed radically over the pump M16 to rinse the chamber. The fan runs in right/left
direction.
10
-
The oven starts in steam mode for four minutes to prepare final rinsing. After this the
final rinsing starts.
11
-
The chamber dried with hot air for 10 minutes. Thereby the chamber heats up to
105°C (221°F).
When cleaning with "short-program" this step is skipped.
12
-
The device turns off itself now. Cleaning is finished.
Note:
During cleaning approx. 3 litres of water are led through the soft water assembly group to rinse out
possible cleaner delays.
At an interruption of the power supply the cleaning process stopped automatically. A cancellation
program which rinses out the cooking chamber is started with a duration of 12 minutes.
This program is carried out also at a manual cancellation.
An entry is written down in the diagnostic memory.
11
Содержание HansDampf 10.1
