MKN FlexiCombi MagicPilot Series, Руководство по установке

Страница: 9 / 48

Safety information
9 Installation instructions
Setup Risk of property damage and personal injury from improper
setup
• Ensure that the installation area has adequate load-bearing
capacity.
• Wear safety shoes and protective gloves.
Electrical connection Risk of fire from improper connection
• Observe applicable regional regulations of the electrical utility.
• Ensure that only electricians licensed by the electric utility connect
the unit.
• Ensure that the electrical system is earthed by a protective
earthing conductor.
• Note the information on the nameplate.
Risk of electric shock from live components.
• Prior to working on the electrical system, switch off the unit,
disconnect the electrical system from the mains and prevent
power from being switched on again. Check to ensure absence of
voltage.
• Use only insulated tools.
Risk of electric shock
• The unit must be incorporated into the potential equalisation circuit
through use of the specified minimum wire sizes.
Unit on casters Risk of a line breaking if subjected to high tensile load
• Secure the unit with a chain as a strain relief for the power
connection at the installation site so that no tensile load is applied
to the power connection if the unit is moved.
Commissioning Risk of property damage and personal injury from improper
commissioning
• Read the operating instructions prior to commissioning. Observe
the safety instructions in this installation manual and in the "Safety
information" chapter of the operating instructions.
• Put the unit into service only after a successful function test
following assembly.
• Put the unit into service only after it has reached room
temperature.
• Observe the units during operation.
10013865-0AIBE-B