MK Sound BE-65, Руководство по установке

Страница: 9 / 9

Removing the Speaker
! !
IMPORTANT! - MAKE SURE WALL ELECTRICITY IS
TURNED OFF BEFORE REMOVING THE SPEAKER !
! !
IMPORTANT! - BE SURE THAT YOU SECURE THE
LOOSE SPEAKER WIRES TO THE BRACKET OR
THE STUD OR THEY WILL BE LOST IN THE WALL!
1. Remove the speaker grille.
2. While holding baffle, loosen screws
sequentially until two inches of screw is
exposed, or screw stops. If using a power
screwdriver, make sure that it is on a low
torque setting to avoid stripping.
2
3. Push the screws in until they are
flush with the front of the baffle.
4. Pull bottom of speaker slightly forward
until bottom screws rest on the drywall.
5. Pull top of speaker out
of the wall opening.
6. Disconnect wires
from crossover.
7. Attach loose wires to stud or bracket
(9)