PanoMachine Panorama Calculator Operators Manual
Copyright by Josef Ehrler
35
•
To extend the overlaps between the rows to Nadir/Zenith
19
we use the calcula-
tion mode for vertical parameters "Optimize Zenith/Nadir"
11.
•
In addition we increase the "Min. Overlap Columns (H)"
7
from 25 to 27%.
These should increase the horizontal overlaps.
The calculation shows the following result:
Interpreting the result:
- The horizontal overlap in the horizontal plain with 31.28%
15
is a very good
value.
- Also the vertical overlaps between rows (P/P) and (P/L) are with 25.89%
19
still
good.
- The vertical status message
25
says, the panorama head is visible in Nadir.
Let's eliminate this disturbing fact.
Considerations for the next calculation:
- To move the lowest row out of the dead angle of the panorama head we use
the calculation mode for vertical parameters "Take into account dead angle"
12
.
2
1
14
19
20
18
22
15
5
4
6
3
12
9
13
23
11
10
17
7
8
16
21
24
25
