Mizuho MOS-1302B Скачать руководство пользователя страница 12

Страница: 12 / 86

Before use

Others

WARNING

CAUTION

Prohibition of disassembling and modification

- Do not attempt to disassemble or modify the table. It may cause a malfunction.

When used together with other medical electrical equipment

- Before using together with other equipment, make sure to check that it is not affected by

electromagnetic interference.

Electromagnetic interference from other medical electrical equipment may cause malfunction.

- When using a high-frequency surgical equipment and/or a cardiac defibrillator etc. with the

operating table, refer to their operator's manual provided by the manufacturers and observe the

precautions and usage. Improper usage may cause the operator or the patient to get burned

and/or devices to malfunction.

Patient's body position

- When using operating table accessories, always pay close attention to the patient. Patients left

in the same posture for an extended period of time are at risk for developing nerve paralysis

and/or bedsores.

Allowable load

Do not exceed the allowable load 135kg

(300lbs)

The table may become inoperable and cause malfunction.

Preventive maintenance and inspection

- Make sure to perform inspection before and after use, and appropriate preventive maintenance

inspection.

The table may not survive its useful life depends on number of years and frequency of use.

- For preventive maintenance inspection, please contact your distributor or us directly.

Antistatic measure

- Do not use the operating table on floors and/or with accessories that do not possess static

electricity countermeasures. This may impede surgical operations.

When used together with other medical equipment or accessories

- Before using another devices or accessories, read carefully the instruction manual of the device

and make sure that the operating table will not be affected adversely. Before fitting an accessory

of third party company, make sure to contact your distributor or us. Some accessories cannot be

fitted.

- When using the operating table, make sure to check the positions of other devices or

accessories. They may come in contact with each other during the operation, and may get

damaged.

- For hygiene, be sure to use sterile drapes on the areas on this product where the patient comes

into contact with it.

Содержание MOS-1302B























































































Результаты поиска

Содержание MOS-1302B

Отзывы:

Похожие инструкции для MOS-1302B

Бренды по названию

Популярные бренды

Mizuho MOS-1302B, Руководство оператора

Результаты поиска

Содержание MOS-1302B

Отзывы:

Похожие инструкции для MOS-1302B

Бренды по названию

Популярные бренды