08
09
PRODUCT SPECIFICATIONS
Battery capacity:
8800mAh lithium polymer battery
Jump starter output:
500A (800A Peak)
Air inflator:
Max 72 PSI pressure
USB-C input port:
5V/2.1A (10.5W)
USB Output charge port:
5V/2A (10W)
Light functions:
Low, high, flashing, SOS, red, red flashing
Light max output:
220lm
USING THE POWERBANK
• Connect a USB cable to the USB-A port (the larger port). Connect the other end to your USB device.
• Press and hold the power button for 3 seconds to turn the unit on.
• Your device will start charging.
• When your device is charged, long press the power button to turn the unit off.
Note: It will automatically power off after 30 seconds if it is not being used.
USING THE LIGHT
• Press and hold the Unit/Light button for 3 seconds to switch to light mode.
• The light will cycle thru its modes as indicated here with each press of the button.
• Low High Flashing SOS Red Red flashing Off
• In any of the light modes long press the Unit change/Light button to turn the light off.
USING THE POWERBANK & USING THE LIGHT
