04
05
FIRST USE & CHECKING THE BATTERY LEVEL
FIRST USE
• Before first use fully charge the powerbank to 100%.
• The digital display will show the battery capacity.
• the display will blink continuously while charging and the number will slowly increase until it reaches 100%.
CHECKING THE BATTERY LEVEL
• Press and hold the power button for 3 seconds to turn the unit on.
• Press the mode button until you see the battery symbol at bottom left of the display.
• The display will show the remaining charge level as a percentage of 100.
• Do not jumpstart a vehicle if the battery level is below 20%.
USING THE JUMPSTARTER FUNCTION
1. Connect the jumpstarter cables to the blue port on the side of the unit. The blue LED on the module will turn on.
2. Attach the red cable to the positive battery terminal of your vehicle.
3. Attach the black cable to the negative battery terminal of your vehicle.
4. When both clamps are connected to the battery, the green light will turn on.
5. You will hear a clicking sound every second to tell you the jumpstarter is ready.
6. Start your vehicle.
7. The blue and green lights on the module will turn off once the vehicle has started.
8. Remove the cables from the vehicle battery, then unplug the clamps from the unit.
Note:
It is not necessary to have the unit powered on to jumpstart your vehicle. If you wish to turn it on, press
and hold the power button for 3 seconds, you will see the battery charge level. Press and hold the power button
for 3 seconds to turn it off or wait 30 seconds, and it will automatically power off.
USING THE JUMPSTARTER FUNCTION
