Document #107-00092-001
4
Getting Started with the GLOVEBOX
Powering up the GLOVEBOX
Verify the electrical service input requirements are met, and all power
connections are plugged in.
Verify the proper line pressures for all gases are correct and that all tube
connections are tight.
Check to see that the power connection is made.
Verify that all component circuit breakers are in the “OFF” position, and proceed
to energize the system by turning on the “CB1” main circuit breaker. Then turn
on all the remaining component circuit breakers.
Next turn on the computer power and log on to the system.
Powering down the GLOVEBOX
Stop all oven cycles.
Close down the Windows application software. Shut down the computer. Wait
for the computer to shut down.
De-energize the system by turning off the “CB1” main circuit breaker.
Next turn on the computer power and log on to the system.
Running the GLOVEBOX
Start the GLOVEBOX application
Double-click the GloveBox icon on the desktop to start up the GLOVEBOX user interface. The
Login Window will be presented (see
Figure 1 Login Screen
).
Log in using your assigned username and password.
Different user groups have different levels of access to the GLOVEBOX system. The
administrator users can access all the GLOVEBOX functions, whereas the operator users only
have access to very limited functions. The system is configured on shipment with a single
administrator account with user name of “admin”. Other user names can be added by starting the
GloveBox software and logging on to the system using this user name and the associated
password. The details are explained in the log on section.
