Miura MP1-200, Руководство по эксплуатации

Страница: 30 / 63

SECTION 3 OPERATION
22
2.2.2 Setting the Current Time
The timer function is activated according to the current time that is set here. When the setting is
done to MI Terminal MT1-200 for boiler No.
(*)
1, no setting is necessary with other MT1-200 units
(Settings are automatically done to other MT1-200 units).
1) Press the “SELECT” switch as many times as
needed to display the current time
(hour/minute).
2) Press the “UP” and “DOWN” switches
simultaneously, and then the digit for hour of
the current time starts blinking.
3) Press the “UP” or “DOWN” switch to set a
value.
4) Press the “SELECT” switch to finish setting
hour, and then the digit for minute starts
blinking.
5) Press the “UP” or “DOWN” switch to set a
values.
6) Press the “SELECT” switch to finish the setting.
2.2.3 Setting the Day of the Week
The timer function is activated according to the day of the week that is set here. When the setting is
done to MI Terminal MT1-200 for boiler No.
(*)
1, no setting is necessary with other MT1-200 units
(Settings are automatically done to other MT1-200 units).
1) Press the “SELECT” switch as many times as
needed to display the day of the week. (The
day of the week is displayed in a number. The
correspondences between days of the week
and numbers are listed as below. )
2) Press the “UP” and “DOWN” switches
simultaneously, and then the digit for the day of
the week starts blinking.
3) Press the “UP” or “DOWN” switch to set a value.
4) Press the “SELECT” switch to finish the setting.
Correspondences between days of the week and numbers
Day of the week Sun Mon Tue Wed Thu Fri Sat
Display 0 1 2 3 4 5 6