Miura CMU-324HE, Руководство по эксплуатации

Страница: 52 / 60

SECTION 5: INSPECTION AND MAINTENANCE
44
Do not use the device if there is smoke, abnormal odor or noise, excessive
overheating, or other abnormalities. If an abnormality occurs, do not operate
the device. Also, make sure the earth leakage circuit breaker is turned OFF
and a main feed water (*) valve is closed and contact your dealer or MIURA
sales office.
Failure to observe this precaution may lead to electric shock, fire, or device
failure.
Replace a tube if a defect such as deformation (a bend or fold), discoloration,
hardening, or cracking is detected on the feed water
(*)
tube or drain tube. If a
deteriorated tube is continuously used, it can rip and cause water leakage.
Use specified tubes when exchanging tubes. Using tubes other than specified
tubes may cause leakage.
3. Daily Inspection
3.1 Inspection Item
NOTE
Wipe with dry soft cloth when cleaning.
Rubbing with hard cloth may make scratches.
3.1.1 Checking Automatic Monitoring
Make sure that monitoring is performed automatically.
If the remote signal input is used, but the remote signal has some problem, the automatic
monitoring does not start.
“1.2 Automatic Monitoring” in SECTION on page 26
3.1.2 Checking Feed Water
(*)
Tube and Drain Tube
Exercise with care to keeping the tubes free from bents or holds.
If the feed water
(*)
tube is bent, it might cause insufficient feed water
(*)
flow rate.
If the drain tube is clogged, the back pressure
(*)
is applied to the device, leading to water
leakage. Use specified tubes when exchanging tubes. Using tubes other than specified tubes
may cause leakage.