Mitsubishi TDP-324, Руководство пользователя

Страница: 56 / 84

Chapter 4 Daily Maintenance
TDP-324
-50-
4.1.1 Cleaning the thermal head
1.
By holding the opening lever A on the top
of the upper cover, open the upper cover.
[Useful tip]
A locking lever is provided to the upper cover to prevent the cover from closing
down. When opening the upper cover, be sure to open it to the position where
the locking lever locks effectively.
2.
Wipe the heating element (thin glassy
band) of the thermal head with a
recommended cleaning cloth soaked in
the adequate amount of recommended
cleaning fluid, applying it overall and
uniformly, and moving it from side to side.
.
Upper cover
Locking lever
Opening lever A
Do not open the upper cover extremely
quickly or forcibly 90 degrees or more.
The thermal head is hot just after
printing. Do not touch it directly by
hand.
Fingerprints on the thermal head
heating element can cause the
thermal head to fail. Do not touch it
directly by hand.
Be careful not to be injured by
protrusions in the Thermal Digiplater.
Thermal head