Mitsubishi TDP-324, Руководство пользователя

Страница: 35 / 84

Chapter 3 Use of Operation Panel
TDP-324
-29-
6.
If you set a plate size for a free-mode
channnel , this set up is finished. Press the
clear button repeatedly until the ready
state is displayed.
If you set a plate size for a
custom
mode channel , please move to “step 7”.
7.
Press the enter button to confirm the width
setting. Then, set a plate length.
・
In case of Millimeter Mode
It can be set from 150mm to 530mm in
increments of 1mm.
・
In case of Inch Mode
It can be set from 5.91 inches to 20.87 inches,
In increments of 1/100 inch.
[Useful tip]
To change values, use the following buttons:
In case of Millimeter Mode
menu button: Increment the number by 10
+ button: Increment the number by 1
loading button: Decrement the number by 10
- button: Decrement the number by 1
In case of Inch Mode
menu button: 2-digit integral part is incremented by 10.
loading button:2-digit integral part is decremented by 10.
+ button:2-digit decimal number area is incremented by 1.
- button: 2-digit decimal part decremented by 1.
8.
Press the enter button to confirm the
length setting.
9.
Press the clear button repeatedly until the
ready state is displayed.
Length: 492mm
FSize01:310x***