Mitsubishi TDP-324, Руководство пользователя

Страница: 24 / 84

Chapter 2 Installation and Setup
TDP-324
-18-
Flange (anti-gear side)
Stopper
8.
Install and fit the flange(anti-gear side) to
the end of the shaft on the opposite side of
the plate.
[Useful tip]
The flange (anti-gear side) has a stopper notch and the shaft has stopper
notches to prevent empty rotation. Check the directions of the spool stopper
notch and notches on the shaft to fit the spool correctly.
9.
Tighten the screw to fix, forcing the flange
(anti-gear side) on the side of the plate,
and fix the flange (anti-gear side).
10.
Install the plate by placing the spool into the
plate box.
Screw to fix
The plate weighs approx. 10 kg(22 lbs).
Handle it carefully so as not to drop it.
Dropping it is dangerous.
Do not tighten the screw too much. It
may damage flange.