Mitsubishi TDJ300D, Руководство по обслуживанию

Страница: 39 / 91

– 39 –
No. Item Contents Care to be taken at the time of operation Anticipated defect Disposition (remarks)
5
6
Parts sold at a
market
Repair to
painted place
•
Care to be taken when
parts sold at a market are
used
•
Early disposition for
peeling of paint and rust
to metallic place of the
unit
1. Do not use easily parts sold at a market
by only checking sizes and capacity.
1. Rust will increasingly develop into a
secondary damage if left alone. Make an
appropriate repair such as touch up after
removing rust with wire brush, sand
paper, etc., and washing well.
1. In case of tension pulley
bearing, using a bearing
with different sealing
structure (nonecontat seal
type) will soon bring
about a defect even after
replacing with new one.
2. Using fuse with different
characteristic will give no
protection or cause
erroneous operation.
1. Hole or crack in panels
2. Fall off of panel
1. Replace them with
genuine parts.
1. Parts which have been
developed into having a
hole or crack are to be
replaced in order to
prevent and accident of
falling off a running
vehicle.