Mitsubishi TDJ300D, Руководство по обслуживанию

Страница: 12 / 91

Since the controller is provided with the function
(memory function) which memorizes the
temperatures preset in the refrigeration unit up to
now, check the preset temperature by pressing
either temperature setting switch or one
time for the assurance's sake.
4
Stopping
• To turn it "OFF", press the operation switch
again and the refrigeration operation will be
stopped.
• Turn the operation switch to "OFF", and the
operation indication lamp and digital display
unit will go out.
Note: Before turning the ignition switch of the car to
"OFF", be sure to turn the operation switch of the
refrigeration unit to "OFF".
(2) Motor driven type (Type 2 alone)
1
Turn the ignition switch of the vehicle to "OFF",
and connect the receptacle of the motor drive
power supply to supply electric power.
Note: Before connecting the power supply, make sure
that the operation switch is "OFF".
2
Press the operation switch to "ON".
When the operation switch becomes "ON", the
operation indication lamp will come on. (Green)
3
Inside temperature setting
Press either setting switch or , and the inside
set temperature on the digital display unit will be
displayed in the blinking mode with the inside
temperature setting mode selected.
Keep the switch pressed as it is, and the setting
temperature will vary.
··· To higher
temperature
··· To lower
temperature
(Continuously press the switch or , and the
temperature will continue varying.)
When the temperature indicated on the digital
display unit is brought to a desired inside
temperature (transportation temperature) by
pressing the temperature setting switch, release the
finger from the switch.
After 5 seconds, the digital display will return to
the inside temperature with the temperature setting
mode ended.
Since the controller has the function to
memorize the temperature which was set during
last operation of the refrigeration unit, press
either temperature setting switch or once
to check the memorized temperature for
caution's sake.
4
Stopping
• Press the operation switch again to turn it to
"OFF", and cooling operation will be stopped.
• Turn the operation switch to "OFF", and the
operation indication lamp and digital display
will go out.
Note: 1) Before disconnecting the receptacle of the
motor drive power supply, be sure to turn the
operation switch of the refrigeration switch to
"OFF".
2) Don't start or stop the unit by using the power
supply breaker or connecting/disconnecting
the power supply plug. Otherwise, it will
cause an electric circuit trouble or electric
shock.
3) Prevent rain and water from splashing over
the receptacle area of the power box, or it will
cause an electric shock when the motor is
driven.
6.5 Operation of display switches
(1) When the refrigeration unit is operating
When the preset temperature, fault code or
integrated operation time is displayed on the
digital display unit, it can be returned to the inside-
container temperature.
(2) When the refrigeration unit is stopped
Press the display switch, and the inside-container
temperature will be displayed on the digital
display unit. At this time, press the following
switch, and the selected content will be displayed.
• Single push of or ····Preset temperature
• ALARM······························Fault code
• HOURS·······························Operation time
• DEFROST···························Defrost interval time
6.6 Defrosting operation and manual defrosting
Defrosting operation is applied to prevent the cooling
effect from dropping since the evaporator is frosted.
▼ ▲
▼ ▲
▼ ▲
Every push of the switch
changes the temperature
by 1°C.



▼
▲
▼ ▲
▼ ▲
– 8 –
 
 
 
 
 
 
 
 
 
 
 
 