Mitsubishi SRC92ZL-S, Техническое руководство и список запасных частей

Страница: 32 / 92

-
0
-
'12 • SRK-T-130
FAN SPEED button
Each time the button is pressed, the
display is switched over in turn.
•
The above illustration shows all controls, but in
practice only the relevant parts are shown.
OPERATION MODE select button
Each time the button pressed, the
display is switched over in turn.
ALLERGEN CLEAR button
This button selects ALLERGEN CLEAR
operation.
ON/OFF (luminous) button
Press to start operation, press again to
stop.
HI POWER/ECONO button
This button changes the HIGH POWER/
ECONOMY mode.
AIR FLOW (UP/DOWN) button
This button changes the air flow (up/
down) direction.
TIME SET UP switch
This switch is for setting the time.
SLEEP button
This button selects SLEEP operation.
CLEAN switch
This switch selects the CLEAN mode.
ON TIMER button
This button selects ON TIMER operation.
AIR FLOW (LEFT/RIGHT) button
This button changes the air flow (left/
right) direction.
CANCEL button
This button cancels the ON timer, OFF
timer, and SLEEP operation.
ACL switch
Switch for resetting microcomputer.
OFF TIMER button
This button selects OFF TIMER
operation.
TEMPERATURE button
These button set the room temperature.
(These buttons are used for setting the
current time and timer function as
well.)
Operation section
O N O C E R E M I T N U R
ON/OFF
HI POWER
Unit display section
ECONO light (orange)
Illuminates during ECONOMY operation.
HI POWER light (green)
Illuminates during HIGH POWER operation.
TIMER light (yellow)
Illuminates during TIMER operation.
This button can be used for turning on/off the unit when
remote control is not available.
Remote control signal receiver
Unit ON/OFF button
RUN (HOT KEEP) light (green)
•
Illuminates during operation.
• Blinks when airflow stops due to the ‘HOT
KEEP’ and ‘CLEAN operation’.
ON
OFF
1.5 sec.
0.5 sec.
HOT KEEP
3 sec.
1 sec.
ON
OFF
CLEAN operation
9. OUTLINE OF OPERATION CONTROL BY MICROCOMPUTER
(1) Operation control function by remote control