Mitsubishi RC-E5, Руководство пользователя

Страница: 11 / 24

10
HOW TO OPERATE IN SILENT MODE
< WIRED REMOTE CONTROL >
1
In the timer mode, set the current day of the week
and current time.
☞
See page 6 step 1 to 7
2
Press SET button for three seconds or more.
The remote control goes into silent mode setting and the following
is displayed.
“ ” or “ ” (lights)
3
Press
▲
or
▼
button.
If
▼
button is pressed, “ ” is displayed.
If
▲
button is pressed, “ ” is displayed.
Select “ ”.
If you press the RESET button, the remote control return to
the original screen.
4
Press SET button.
The following setting is displayed.
“ ” (flashing)
“ ” (lights)
5
Press
▲
or
▼
button.
Set the “ON TIME”.
Set “Hour” •
If you hold
▲
or
▼
, the number in “Hour” display changes, and
if you release it, the number stops changing.
Set “Minute” •
If you press
▲
or
▼
button, the number in the display becomes
larger or smaller by ten minutes.
If you press the RESET button, the remote control return to
the “ ” display.
6
Press SET button.
The ON TIME is set and the following is displayed.
“ ” (flashing)
“ ” (lights for two seconds)

“ ” (flashing)
“ ” (lights)
7
Press
▲
or
▼
button to set the duration.
Select OFF time.
When you press
▲
button, and the duration is increased by two
hours as below, “ ”  “ ”  “ ” 
“ ”
When you press
▼
button, and the duration is decreased by two
hours.
If you press
RESET button, the “ON TIME SET” display
returns.
8
Press SET button.
The setting is fixed and displayed.
“
” is displayed, and the silent mode setting ends.
The setting display turns off, and returns to original display.
3
•
5
•
7 2
•
4
•
6
•
8 1
When the silent mode is set, the unit operates more silently reducing noise from the outdoor unit.
The system applies the silent operation mode at the starting time to be set, and finish it after a certain period of
time has passed.
Once the system is set to operate with the silent mode, the setting is applied everyday until it is canceled.
NOTICE
• The remote control has main-sub units, silent setting
cannot be operated with sub unit .
• After the silent mode is set, the following is displayed
for 3 seconds at the set time and the unit returns to
the original display.
At the ON time : “
”
At the OFF time : “ ”
• If you select “ ”, you can continue the
silent mode until it is canceled. At the first ON time,
the display shows “
” for three seconds
and returns to original display.
 Canceling Silent Mode (Setting)
Select “ ” in step 2 , press
SET button and silent setting is canceled
ending the silent mode.
“
” is displayed.
SILENT MODE
 Silent Mode Setting
• If you press button while
timer mode is under setting, timer mode is
canceled and the display will return to the
original one. Note that the setting which has
not been completed is canceled.
HOW TO PERFORM THE TIMER OPERATION < WIRED REMOTE CONTROL >
TIMER CANCELLATION MODE
2•4
7
1
3•5•6
In case “ ” , “ ” or “ ” was
selected.
5
Press SET button.
The detailed setting of selected timer mode is displayed as
shown below.
(But if not set, “
” is displayed)
<Display EXAMPLE when “ ” is selected>
If you would like to quit cancellation, press the RESET
button to return to the “ ” display. (step 4 above)
6
Press SET button.
The display of the detailed timer setting is turned off, and
after the message “
” is displayed for two seconds,
“ ” is displayed again. (step 4 above)
Repeat steps 4 to 6 to continue canceling timer mode settings.
In case “ ” was selected.
All the Weekly timer setting will be canceled if you proceed the
following steps.
To cancel a part of the timer setting, please see “Canceling
Weekly timer Mode Setting” on page 9.
5
Press SET button.
The settings are displayed as shown below.
(But if not set, “
” is displayed)
If you would like to quit cancellation, press the RESET
button to return to the “ ” display. (step 4 above)
6
Press SET button to confirm.
The day of the week display area turns off, and after the
message “
” is displayed for two seconds, the
display returns to “ ”. (step 4 above)
These operation settings cancel all days of the week.
1
Press TIMER button.
Timer mode begins.
The current “The day of the week” and “the current time” are
displayed.
[ ]
“ ”
“ ”
2
Press
▼
button for five times.
“ ”

“ ” (
▼
first press)

“ ” (
▼
second press)

“ ” (
▼
third press)

“ ” (
▼
fourth press)

“ ” (
▼
fifth press)
3
Press SET button.
Timer Cancellation Mode begins.
4
Press
▲
or
▼
button.
By pressing
▲
or
▼
button, it is possible to choose the item to cancel.
“ ”
↕
“ ”
↕
“ ”
↕
“ ” (canceling all days of the week)
If you press the RESET button, the remote control will
return to the previous screen, and display “ ”.
(step 2 above)
7
Press ON/OFF button.
Timer mode ends.
• If you press button while timer mode
is under setting, timer mode is canceled and the
display will return to the original one.
• If you do not press any button for several minutes
after entering the timer mode, the timer mode ends
and the display returns to the original one.
NOTICE