15
Your company internal use only.
Copyright (C) Mitsubishi Electric Corporation.
NR-242UM-13LND0,13-WS
No.
Screw
Tighten torque(N
・ｍ）
Ⓐ
2.6X6
0.4 +0.2/-0.1
DISASSEMBLING PROCEDURES
●
Disassembling procedures
In reverse of assembling procedures.
●
Assembling procedures
1.Match pasting position of M034 with sidepiece of M012 and fan end face and R end ridgeline, and put it.
2.Through on a lead of M012 in order of a number.*Slit (1)
→
Slit (2)
→
Slit (3)
3.Attach M012 to the square hole of M020 and hang a A point of M022 on the bending point of M020.
And set it in positioning E, and screw them with
Ⓐ
. (2 places)
* At that time do not press the central part of FAN.
4.Insert the lead of M012 to the connector of S4-CHASSIS and set M020 to positioning F of S4-CHASSIS.
And screw with
Ⓐ
. (10 places) * At this time, the lead be careful not to be caught .
Do not press the central
part.
Bending point
Lead
Positioning E
Pasting position
End face
of FAN
Lead
Slit(1)
Slit(2)
Slit(3)
1)Put a lead through the
direction of the arrow.
2)Put a lead through the
direction of the arrow.
3)Put a lead through the
direction of the arrow.
R end ridgeline
Insert the connector
of the fan.
Positioning F
Ⓐ
x 10
Ⓐ
x 2
S4-CHASSIS
M020: PLATE-REAR
M012: MOTOR-FAN
M022: HOLDER-FAN
M034: SHEET-FAN-R
M012:
MOTOR-FAN
