15
1-12. TIMER OPERATION
1. How to set the timer
(1) Press OPERATE/STOP (ON/OFF) button to start the air conditioner.
(2) Check that the current time is set correctly.
NOTE : Timer operation will not work without setting the current time. Initially “AM0:00” blinks at the current time display of
TIME MONITOR, so set the current time correctly with CLOCK SET button.
ON timer setting
(1) Press ON-TIMER button( ) to set ON timer.
Each time the button is pressed, ON timer mode alternates between ON and OFF.
(2) Set the time of the timer using TIME SET buttons (
and
).
Each time FORWARD button( ) is pressed, the set time increases by 10 minutes; each time BACKWARD
button (
) is pressed, the set time decreases by 10 minutes.
OFF timer setting
(1) Press OFF-TIMER button ( ) to set OFF timer.
Each time the button is pressed, OFF timer mode alternates between ON and OFF.
(2) Set the time of the timer using TIME SET buttons (
and
).
Each time FORWARD button (
) is pressed, the set time increases by 10 minutes; each time BACKWARD (
)
button is pressed, the set time decreases by 10 minutes.
2. Cancel
TIMER setting can be cancelled with ON/OFF TIMER buttons.
To cancel ON timer, press ON-TIMER button ( ).
To cancel OFF timer, press OFF-TIMER button( ).
TIMER is cancelled and the display of set time disappears.
START
STOP
START
STOP
1-11. AUTO FRONT PANEL
When the unit starts operating, the front panel opens automatically to draw in air.
When the unit stops operating, the front panel closes automatically.
Operation and operating range of the auto front panel
The front panel fully opens 10 mm or more upper than the level line of the top end of the nozzle assembly.
It takes about 13 seconds to open the front panel completely.
Open
Closed
10 mm or more
Z-Z Side view
OBT14A--1qxp 06.1.12 1:07 PM Page 15