Mitsubishi MELSEC-A A1SCPUC24-R2 Скачать руководство пользователя страница 157 | Manualshive

Страница: 157 / 160

background image

WARRANTY

Please confirm the following product warranty details before using this product.

1. Gratis Warranty Term and Gratis Warranty Range

If any faults or defects (hereinafter "Failure") found to be the responsibility of
Mitsubishi occurs during use of the product within the gratis warranty term,
the product shall be repaired at no cost via the sales representative or
Mitsubishi Service Company.
However, if repairs are required onsite at domestic or overseas location,
expenses to send an engineer will be solely at the customer's discretion.
Mitsubishi shall not be held responsible for any re-commissioning,
maintenance, or testing on-site that involves replacement of the failed
module.
[Gratis Warranty Term]
The gratis warranty term of the product shall be for one year after the date of
purchase or delivery to a designated place.
Note that after manufacture and shipment from Mitsubishi, the maximum
distribution period shall be six (6) months, and the longest gratis warranty
term after manufacturing shall be eighteen (18) months. The gratis warranty
term of repair parts shall not exceed the gratis warranty term before repairs.
[Gratis Warranty Range]
(1)The range shall be limited to normal use within the usage state, usage

methods and usage environment, etc., which follow the conditions and
precautions, etc., given in the instruction manual, user's manual and
caution labels on the product.

(2)Even within the gratis warranty term, repairs shall be charged for in the

following cases.
1.Failure occurring from inappropriate storage or handling, carelessness

or negligence by the user. Failure caused by the user's hardware or
software design.

2.Failure caused by unapproved modifications, etc., to the product by the

user.

3.When the Mitsubishi product is assembled into a user's device, Failure

that could have been avoided if functions or structures, judged as
necessary in the legal safety measures the user's device is subject to or
as necessary by industry standards, had been provided.

4.Failure that could have been avoided if consumable parts (battery,

backlight, fuse, etc.) designated in the instruction manual had been
correctly serviced or replaced.

5.Failure caused by external irresistible forces such as fires or abnormal

voltages, and Failure caused by force majeure such as earthquakes,
lightning, wind and water damage.

6.Failure caused by reasons unpredictable by scientific technology

standards at time of shipment from Mitsubishi.

7.Any other failure found not to be the responsibility of Mitsubishi or that

admitted not to be so by the user.

«
...
155
156
157
158
159
...
»

Содержание MELSEC-A A1SCPUC24-R2

































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MELSEC-A A1SCPUC24-R2

Бренд: ZKTeco Страницы: 2

Бренд: FASAR ELETTRONICA Страницы: 2

Бренд: Faro Barcelona Страницы: 8

Бренд: Faro Страницы: 3

Бренд: YASKAWA Страницы: 456

Бренд: Warren Controls Страницы: 28

Бренд: EAS Electric Страницы: 89

Бренд: Paradox Страницы: 2

Бренд: Paradox Страницы: 44

Бренд: Parkside Страницы: 65

Liquitron DP5000-01A

Бренд: LMI Technologies Страницы: 28

Бренд: Motrona Страницы: 10

PSS67 IO1 16FDI

Бренд: Pilz Страницы: 36

Бренд: GHL Страницы: 34

Бренд: Fibocom Страницы: 79

Бренд: oventrop Страницы: 40

Бренд: REGLOPLAS Страницы: 44

Бренд: Sentiotec Страницы: 45

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды