Mitsubishi MELSEC-A A1SCPUC24-R2, Руководство пользователя

Страница: 123 / 160

97
"CAN’T
EXECUTE
(P)"
(Checked at
instruction
execution.)
13 — Stop
(1) There is no jump
destination or
multiple
destinations
specified by the
, , ,
, or
instruction.
(2) Although there is
no
instruction, the
instruction
exists in the
program and has
been executed.
(3) The , ,
, , or
instruction
has been
executed with its
jump destination
located below the
instruction.
(4) The number of the
instructions is
different from that
of the
instructions.
(5) A instruction
is given within a
loop
causing the
processing to exit
the loop.
(6) Processing exited
subroutine by the
instruction
before execution
of the
instruction.
(7) Processing
jumped into a step
in a
loop
or into a
subroutine by the
instruction.
Read the error step by
use of peripheral
equipment and correct
the program at that
step.
(Insert a jump
destination or reduce
multiple destinations to
one.)
Table 6.2 Error Code List for A1SHCPU and A2SHCPU (Continue)
Error
Message
Error
Code
(D9008)
Detailed
Error
Code
(D9092)
CPU
States
Error and Cause Corrective Action
CJ SCJ CALL
CALLP JMP
CALL
RET
CJ SCJ
CALL CALLP
JMP
END
FOR
NEXT
JMP
FOR to NEXT
JMP
RET
FOR to NEXT
JMP