Mitsubishi GOT1000 Series, Руководство пользователя

Страница: 188 / 250

15 - 16
15.3 FX List Editor (For GT104[ ], GT105[ ] only)
15.3.3 Access range
4 Functions list and monitor conditions
The following shows the memory that can be monitored by the MELSEC-FX list editor and the FX PLC
status conditions.
( : Can be monitored : Can be monitored under certain conditions : Cannot be monitored)
*1 The operation is available only when the protect switch is OFF.
*2 The available memory differs depending on the FX PLC being used.
For further information, see the following manual.
The hardware manual of the FX PLC being used
15.3.3 Access range
The access range is the same as the access range when the GOT is connected to a controller.
Refer to the following manual for details of the access range.
GT Designer2 Version Screen Design Manual
GOT1000 Series Connection Manual (Mitsubishi Products)
Function
Memory that can be monitored
*2
FX PLC
status
Reference
Built-in
memory
RAM memory
cassette
EEPROM
memory
cassette, flash
memory
cassette
EPROM
memory
cassette
Reading
sequence
programs
Displaying sequence
programs
RUN/
STOP
SubSection
15.3.8
Searching commands/
devices SubSection
15.3.9
Writing
sequence
programs
Writing commands
*1
For Stop
only
SubSection
15.3.10
Changing operands/set
values SubSection
15.3.11
Inserting commands
SubSection
15.3.10
Deleting commands
SubSection
15.3.12
Sequence program all clear
SubSection
15.3.13
PLC diagnostics RUN/
STOP
SubSection
15.3.14
Parameter setting
Display
SubSection
15.3.15 Set
*1
For Stop
only
Keyword
RUN/
STOP
SubSection
15.3.16