Mitsubishi GOT1000 Series, Руководство пользователя

Страница: 136 / 250

11 - 16
11.3 Communication Monitor
11.3.3 Screen display content
11.3.3 Screen display content
1) Connection status of the communication ports
Indicates the connection status of Standard I/F-1 and I/F-2.
Listed in the table below are display items and the connection status (channel number).
2) Communication status
Communication status of each communication port is displayed on this screen.
The SD and RD symbols appear in black on white ( , ) while data are being sent or
received, and in white on black ( , ) at other times. They may appear lit depending on the
communication status.
The SD and RD symbols on the screen indicate normal communication or cable disconnection.
[During normal communication (with connection to a device that supports the transparent mode)]
The SD and RD symbols for both I/F-1 and I/F-2 blink.
[When the connecting cable with the controller is disconnected]
Only the SD symbol next to I/F-1 blinks.
Display item Channel number Remarks
PLC Ch1 "PLC" appears when connected to a controller (PLC or microcomputer)
BCR Ch8 "BCR" appears when connected to a bar code reader
TRANS. Ch9
"TRANS." appears when the controller that is allocated to one of the
communication ports supports the transparent mode
"TRANS." automatically changes to "PC" when communicating with
drawing software
PC Ch9
"PC" appears when the controller that is allocated to one of the
communication ports does not support the transparent mode
Port Channel number Controller type
I/F-1 Ch1 MELSEC-FX
IF-2 Ch8, Ch9
−
2)
3)
1)
SD RD
SD RD