Mitsubishi GOT1000 Series, Руководство пользователя

Страница: 108 / 250

8 - 20
8.7 Protective cover for oil
8.7.2 Installing procedure
3 Mount the GOT onto the control panel.
When the control panel is dirty, clean the control panel.
The panel cutting dimensions and mounting screw
tightening torque with the protective cover for oil are
the same as those without the cover.
Mount the GOT onto the control panel by referring to
Chapter 6.
Precautions for protective cover for oil
• The protective cover for oil is consumable product.
Check the cover for scratch, damage or dirt at regular intervals, and replace
with new one if necessary.
• Do not push the protective cover for oil with pointed tools, including
mechanical pencils and screwdrivers.
Doing so causes scraches and damages of the cover.
• Do not clean the protective cover for oil with bleaches, thinners, organic
solvents, corrosive chemicals, and others. Doing so causes changes in
shape and color of the cover.
• When the protective cover for oil is attached to the GOT, do not stretch and
bend the cover too much.
Doing so may cause a separation between the sheet and rubber.
• Do not place or use the protective cover for oil in direct sunshine.
• When the protective cover for oil gets dusts, wipe the dusts off with a damp
cloth.
Protectivecover
for oil
Panel cut
dimensions
Control panel
Mounting metal fixture