19
(c) Setting the [Air conditioning system name]
1) Under the state when the [Customer name
folder] desired to be set on the air conditioning
system is focussed, the sub-menu will be
displayed by right-clicking the air conditioning
system list at the right screen.
2) Selecting [Create ...] displays [Setting screen of
air conditioning system].
[Setting screen of air conditioning system]
1) Set the system name.
2) Select the method to connect with the system.
-
To connect by using
LAN (WAN)
, enter the IP
address of G-50 to be connected. (Same as
1.4.3.1)
-
To connect by using
Dial-up
, select the
[Connection name] of dialup router of the local
G-50 being previously set on the dialup
connection screen of Windows. And enter [User
name] and [Password] for the connection with
the dialup router, and lastly enter the IP address
of G-50. (Same as1.4.3.2)
-
To connect under
E-mail mode
, enter the
E-mail address of G-50 to be connected.(Refer
to1.4.3.3.)
-
To connect remotely with
MN Converter and
Modem
, select [Modem(MN Converter)].
3) Enter special notes if any on the comment column.
After entering and selecting the above, press [OK].
Set various information as required by repeating the items
(a)-(c) above
.
Using the area selecting section allows you to extract the
only area desired to display.
