40
3.9.3 Sending Command
(1)
Click on and the
Sending
Command Screen
will appear.
(2) Input M-NET command desired to transmit by
clicking on the button.
Direct input from the keyboard is also possible.
(3) After inputting command, click on . Response command is displayed on [
Answer
]
column.
(4)
Click on to end the
Sending
Command Screen
and return to the
Optional Setting Screen
.
3.9.4 Monitoring of Pre-error Data
(1)
Click on and the
Pre-error Data
Screen
will appear.
- When it chooses except the outdoor unit or
constant speed unit (OS), the message of
“
This model doesn’t have the function of
Monitoring of Pre-error.
” is displayed not allowing
operation.
(2) As the screen opens, the monitoring of the data of
the selected unit before error occurred will
automatically be started.
(3) After ending the monitoring, the data of the selected unit before error occurred is displayed in a unit of
minute on
Pre-error Data Screen.
Each figure on the upper column indicates a number of minute before generating an error respectively.
The change of the display content is performed with Up/down, left/right scroll bar.
The number of displayed items and that of the stored data (per minute) differ depending on the
selected item.
(4)
”
Menu Bar
”
The menu bar displays [
Return
] and [
Help
].
- Click on [
Return
] to end the
Pre-error Data Screen
and return to the
Optional Setting
Screen
.
As the screen to save data will appear, change the data
name as required and save it. You may enter your
comment also.
After saving, return to the Optional Setting Screen.
- Click on [
Help
] and an explanation about "
Terminology
" and
"
Operation Method
" will be displayed.
[Refer to
3.6 Connecting Information 3.6.2 (2)”Menu Bar”
]
*
NOTE
Use this function after obtaining the knowledge of
M-NET
command.
