Mitsubishi FDT208HEN-S, Инструкция по эксплуатации

Страница: 33 / 74

243
FDTN-H
(3) Control switch
Model FDF series
The liquid crystal display area indicates the full contents of display for explanation.
TIMER SET MODE
AUTO SWING FAN SPEED
CHECK FILTERRESET
PROGRAMTIMER
ON OFF
PM
AM
SET TEMP
E
°
C
LO
HI
FAN
°
C
Outdoor No.
CENTER REMOTE F I L T E R
AUTO DRY COOL FAN HOT KEEP
Remote display
This display is indicated when the unit is controlled
by the normal individual operation control.
(The indication remains intact while the air-condi-
tioner is stopped, too.
Filter sign
When this display is indicated, clean the air filter.
Center display
¡
This display is indicated when the unit is
controlled by the center console that is
sold separately.
¡
Indicator lamp lights when the switch
operation is fixed.
Timer operation display
This display indicates the content of
timer operation.
(The indication remains intact while
the air-conditioner is stopped, too.)
The swing louver control
It is displayed as shown during
swing louver control.
Operation mode display
The selected operation mode is
indicated.
Prepararion of heating
(HOT KEEP) display
FAN SPEED display
The fan speed set is displayed.
Setting temperature display
This display indicates the setting
temperature.
Mode switch
This switch makes selection of the
operation mode.
ON/OFF switch
This switch performs run/stop of the
air-conditioner. Press switch once
to “run” and press it again to “stop”.
Operation/check indication lamp
During normal operation: Green lamp is lit.
When an error occurred: Red lamp flickers.
Auto swing switch
Activates and stops the swing louver.
FAN SPEED switch
The fan speed is switched.
Temperature setting/time setting switch
This switch is used to set the room tempera-
ture and the timer time.
Check switch
This switch is used for service.
Filter reset switch
This switch resets (erases)
the filter sign display.
(Press this switch after the
cleaning of filter has been fin-
ished.)
Timer switch
This switch is used to select the
content of timer operation.
Setting switch
This switch is used to set the
timer time.
Return air temperature display
The temperature of return air is indicated.
NOTE
The indicated temperature value may be
different from the indication of thermometer,
etc. but this is not abnormal.