Mitsubishi FDT208HEN-S, Инструкция по эксплуатации

Страница: 31 / 74

241
FDTN-H
MODE TEMP ON/OFF
AIR FLOW
FILTER
FAN SPEED
SET
TIME ACL
TIMER
AUTO COOL DRY FAN HEAT
FILTER
°
C
AM
PM ON AM
PM OFF
FAN HI LO
6.4 OUTLINE OF OPERATION CONTROL BY MICROCOMPUTER
(1) Wireless remote controller
Models
FDTN, FDEN, FDKN series
(a) Remote controller
OPERATION MODE indicator
Indicates selected operation mode
Fan speed
Indicates the selected fan speed
Timer ON time
Indicates the timer ON time.
When the timer mode is “CONT” or “OFF”,
the present time is indicated.
FAN SPEED button
Every time when the button is pressed, the
mode is sequentially changed HI
→
LOW.
Timer mode button
Every time when the button is pressed, the
mode is sequentially changed CONT
→
ON
→
OFF
→
PROGRAM.
Reset switch
Used to reset the microcomputer when some-
thing is wrong on the remote controller dis-
play.
• Above figure shows all indications for the
purpose of explanation, but practically
only the pertinent parts are indicated.
OPERATION MODE select button
This button, whenever pressed, changes the
mode in the following order.
Auto swing
Indicates the selection of swing louver.
CAUTION
Cooling only air-conditioner has the display of “COOL”, “DRY” and “FAN” only.
Air flow direction button
Used to start or stop the swing louver.
Signal sender
Signals are sent to the air conditioner
from here.
Filter reset indicator
The
FILTER
mark is indicated when the
FILTER RESET button is pressed.
Temperature indicator
Set temperature is indicated.
Timer OFF time
Indicated the timer OFF time.
When the timer mode is “CONT” or
“OFF”, there is no indication.
ON/OFF button
When the button is pressed, the air conditioner
is started, and when the button is pressed once
again, it is stopped. (When the air conditioner
is stopped, the present time only is indicated.
When the air conditioner is operating, details
of setting are indicated.)
ROOM TEMP. button
Room temperature is set within the
range of 18-30˚C by operating the
∆
,
∇
or button.
Filter button
Used to reset (turn off) the filter sign.
(Press for more than 1 second.)
Press the button only after completing
the filter cleaning.
TIME button
Used to set the present time and the timer
operation time.
Set button
Used to switch from the hour to minute or vice
versa when setting the present time or timer
operation time.
Clock switch
Press this before setting the present time.
(b) Indoor unit indicators
Model
FDTN series
Model
FDKN series
➞
AUTO
➞
COOL
➞
DRY
HEAT FAN
Remote controller
signal receiver.
RUN LAMP (GREEN)
Light up : Air conditioner is operating.
TIMER/CHECK (YELLOW)
Light up : Timer mode operating.
Flashing : When some error occurs.
CAUTION
Cooling only air-conditioner changes the mode in the follow-
ing order.
COOL
➞
DRY
➞
FAN