Mitsubishi DX-TL800EZ, Оперативное руководство

Страница: 34 / 80

2
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Multplex
& Record
Digital
TIMER
ENTER/
FF
CLEAR/
REW
M-DET PRE ALARM LOCK EMERGENCY
SPLIT/
SEQUENCE
ZOOM
ACCESS
REC/STOP
DIGITAL RECORDER DX-TL800E
POWER
5 6 7 8 9 1 2 3 4
10 14 13 12 11 8 9
7 6 5 1 2 3 4
1. POWER button
When pressing this button while the MAIN switch on
the rear of this unit is set to ON, the power turns on
and the button lights. When the button is pressed
again, the unit will be in standby and the light will
turn off. When the unit is in operational transition
such as booting, the button will flash and other op-
erations are not accepted.
2. ACCESS indicator
Illuminates during access to hard disk drive or Com-
pact Flash Card.
3. Camera number buttons (1 to 9)
Press the button to display the image of the camera
connected to this unit on the monitor.
4. TIMER button
When pressing this button, the unit is set to timer re-
cording/standby and the button flashes. When press-
ing this button for more than 1 second, timer record-
ing/standby is cancelled and the button turns off.
5. REC/STOP button
When pressing this button, recording starts and the
button lights. When pressing the button for more than
1 second, the recording stops and the light turns off.
When pressing this button during alarm recording,
recording stops. During timer recording, recording
will not stop even if the button is pressed.
6. SHUTTLE ring
Used to set various menus and search functions,
adjusting the playback speed, and rewinding or
forwading the image.
7. JOG dial
Used to set various menus and search functions,
forwading or rewinding the image during playback
(field-by-field).
8. SPLIT/SEQUENCE button
Press the button to display SPLIT4 ,SPLIT9 screen
or SEQUENCE screen setting on multiplexer func-
tions.
9. ZOOM button
When pressing this button once during single screen
display, the screen is magnified by 100%. In the same
way, pressing the button twice magnifies the screen
by 200% and pressing the button three times magni-
fies the screen by 400%. During single screen dis-
play, the magnification center point (X) is displayed
on the center of the screen. Pressing a camera
number button (1, 2, 3, or 4) will move the screen
according to the magnification center point as the
axis.
10. PRE ALARM indicator
Illuminate during pre-alarm recording and pre-alarm
recording stand-by mode.
11. M-DET indicator
Illuminates when the motion detection function is on.
The lamp flashes when motion detection is in opera-
tion.
12. EMERGENCY indicator
Flashes during emergency recording and lights when
recording is completed.
13. LOCK indicator
Illuminates when simple lock or password lock is on.
Major operations and their functions
■
Front View