22
Rubber roller
Shaft
Paper end sensor
Ditch part of shaft
Slide the kit to "1" direction
with moving "2" direction.
1
2
6
6
6
6
6
Cleaning paper guide shaft.
The seal paste is stuck on the ditch part of the shaft if you use it for a long time.
Wipe with tissue paper etc. which is soaked in a small amount of alcohol carefully
.
NOTE
Do not touch the coated black surface with metals.
7
7
7
7
7
Cleaning paper end sensor.
Wipe the dust with cotton buds which is soaked in a small amount of alcohol.
8
8
8
8
8
Cleaning rubber roller.
The seal paste and dust etc. are stuck on the rubber roller if you use it for a long
time.
Wipe with tissue paper etc. which is soaked in a small amount of alcohol carefully
.
9
9
9
9
9
Cleaning print outlet.
The seal paste may be stick on the paper guide inside or dust may enter from
the print outlet.
Use the optional cleaning kit to clean inside as the picture shows.
NOTE
Do not use alcohol etc. when cleaning the print outlet.
CLEANING