Mitsubishi MOTORS Colt 2007 Скачать руководство пользователя страница 364

Страница: 364 / 450

8-22

Maintenance

Snow tyres

E01002000549

The use of snow tyres is recommended for driving on snow and

ice. To preserve driving stability, mount snow tyres of the same

size and tread pattern on all four wheels.
Snow tyres worn more than 50 % are no longer suitable for use

as snow tyres.

Snow tyres which do not meet the specifications must not be
used.

NOTE

●

The laws and regulations concerning snow tyres (driving

speed, required use, type, etc.) vary. Find out and comply

with the laws and regulations in the area you intend to
drive in.

●

If flange nuts are used on your vehicle, change to tapered

nuts when steel wheels are used.

Tyre chains

E01002101039

If tyre chains have to be used, ensure that they are fitted only

on the drive wheels (front).

Use only tyre chains which are designed for use with the tyres
mounted on the vehicle: use of the incorrect size or type of

chain could result in damage to the vehicle body.

Before fitting tyre chains, we recommend that you consult a
MITSUBISHI MOTORS Authorized Service Point. The Max.

chain height is as follows.

CAUTION

●

If the tyres have arrows (A) indicating the correct
direction of rotation, swap the front and rear wheels

on the left hand side of the vehicle and the front and

rear wheels on the right hand side of the vehicle sep-
arately. Keep each tyre on its original side of the

vehicle. When fitting the tyres, make sure the

arrows point in the direction in which the wheels
will turn when the vehicle moves forward. Any tyre

whose arrow points in the wrong direction will not

perform to its full potential.

CAUTION

●

Avoid the combined use of different types of tyres.

This can affect driving safety.

Front

CAUTION

●

Observe the permissible maximum speed for your

snow tyres and the legal speed limit.

Содержание Colt 2007



































































































































































































































































































































































































































































Результаты поиска

Содержание Colt 2007

Отзывы:

Похожие инструкции для Colt 2007

Бренды по названию

Популярные бренды

Mitsubishi MOTORS Colt 2007, Руководство пользователя

Результаты поиска

Содержание Colt 2007

Отзывы:

Похожие инструкции для Colt 2007

Бренды по названию

Популярные бренды