Mitsubishi MOTORS Colt 2007 Скачать руководство пользователя страница 327

Страница: 327 / 450

For emergencies

6-37

Towing the vehicle by a tow truck

Towing with rear wheels off the ground (Type B)

Place the gearshift lever (manual transmission) or the allshift

lever (automated manual transmission) in the “N” (Neutral)

position. With a vehicle that has an automated manual trans-
mission, confirm that the transmission is in the “N” (Neutral)

position by checking that “N” is shown by the allshift indicator

display and by pushing the vehicle.
Turn the ignition key to the “ACC” position and secure the

steering wheel in a straight ahead position with a rope or tie-

down strap. Never place the ignition key in the “LOCK” posi-
tion when towing.

If, with a vehicle that has an automated manual transmission,

the engine will not start and the transmission is not in the “N”
(Neutral) position, press the brake pedal, turn the ignition

switch to the “ON” position, and move the allshift lever to the

“N” (Neutral) position.

Towing with front wheels off the ground (Type C)

Release the parking brake.
Place the gearshift lever (manual transmission) or the allshift

lever (automated manual transmission) in the “N” (Neutral)
position. With a vehicle that has an automated manual trans-

mission, confirm that the transmission is in the “N” (Neutral)

position by checking that “N” is shown by the allshift indicator
display and by pushing the vehicle.

If, with a vehicle that has an automated manual transmission,

the engine will not start and the transmission is not in the “N”

(Neutral) position, press the brake pedal, turn the ignition
switch to the “ON” position, and move the allshift lever to the

“N” (Neutral) position.

CAUTION

●

This vehicle must not be towed by a tow truck using
sling lift type equipment (Type A) as illustrated.

Using a sling lift will damage the bumper and front

end.

●

If the transmission is malfunctioning or damaged,

transport the vehicle with the driving wheels on a

carriage (Type C, D or E) as illustrated.

●

If your vehicle has an automated manual transmis-

sion, place the allshift lever in the “N” (Neutral)

position before stopping the engine.

CAUTION

●

[For vehicles with the traction control system

(TCL)/active stability control system (ASC)]

If the vehicle is towed with the ignition switch in the
“ON” position and only the front wheels or only the

rear wheels raised off the ground, the traction con-

trol system (TCL) may operate, resulting in an acci-
dent.

Refer to “Traction control system (TCL)/Active sta-

bility control system (ASC)” on page 4-42.

Содержание Colt 2007



































































































































































































































































































































































































































































Результаты поиска

Содержание Colt 2007

Отзывы:

Похожие инструкции для Colt 2007

Бренды по названию

Популярные бренды

Mitsubishi MOTORS Colt 2007, Руководство пользователя

Результаты поиска

Содержание Colt 2007

Отзывы:

Похожие инструкции для Colt 2007

Бренды по названию

Популярные бренды