Mitsubishi Heavy Industries SC-SL4-AE2 Скачать руководство пользователя страница 21

Страница: 21 / 98

– 20 –

Press the button for the item to set or change.

• RUN/STOP/HOME LEAVE ON/HOME LEAVE OFF

Press the RUN, STOP,

button.

– When the RUN button is selected, the operation starts, and when the STOP button is

selected, the operation stops.

– When the

button is selected, Home leave operation starts.

* MODE and SET TEMP. cannot be set.

– When the

button is selected, Home leave operation stops.

• MODE

Select Auto, Cool, Dry, Fan or Heat by pressing the button.

– Auto Mode can be valid in the FUNCTION SETTING.

page 84

This function can be applied to the indoor units, which are the cooling/heating free
multi KXR, single split PAC.

• SET TEMP.

Press

page 64 (TEMPERATURE RANGE SETTING)

• FAN

Select (Powerful), (High), (Medium), (Low), or (AUTO), and press the
button.

– When using automatic mode, valid the AUTO FAN on the FUNCTION SETTING.

– When using powerful mode, select 4-speed for FAN TYPE on the GROUP

DEFINITION DETAILS screen.

(Powerful mode)

Operates with the maximum fan speed.
It is suitable for heating or cooling the entire room thoroughly.

• Air direction

Select Auto, stop 1, stop 2, stop 3 or stop 4 and press the button.

• Lock

Press or .
If is pressed, remote controller operations are permitted, and if is pressed, they are
prohibited.

• FILTER RESET

If the

button is pressed, the

lter sign turns o

ﬀ

• Energy Saving

Press the ON or OFF button.

– When the ON button is selected, energy saving operation starts.

– When the OFF button is selected, energy saving operation stops.

Use this operation to save energy. A unit shifts its set temperature by outside
temperature.

page 65

Содержание SC-SL4-AE2



































































































Результаты поиска

Содержание SC-SL4-AE2

Отзывы:

Похожие инструкции для SC-SL4-AE2

Бренды по названию

Популярные бренды

Mitsubishi Heavy Industries SC-SL4-AE2, Руководство пользователя

Результаты поиска

Содержание SC-SL4-AE2

Отзывы:

Похожие инструкции для SC-SL4-AE2

Бренды по названию

Популярные бренды