−54−
5.
Regarding the item mentioning Administrator password
in the user’s manual, when selecting such item, the
[Input Administrator password] screen is displayed.
Enter the administrator password (4 digits number) and
tap Set button.
If the administrator password is unknown or wrong, the
setting cannot be changed.
・
When returning to each following screen from the setting screen, please operate following
button or switch.
■
When returning to the previous screen …… Tap Back button
■
When returning to the TOP screen …… Tap Run/Pause button
・
If tapping Back button without tapping Set button on the way of setting, the set contents
becomes invalid and it returns to the last previous screen. And if pushing Run/Pause switch
on the way of setting, the set content becomes invalid and it returns to the TOP screen after
ending this setting mode.
・
If no button operation is done for about 5 minutes on the way of setting each item, it returns to
the TOP screen automatically and the content going to set becomes invalid.
・
When tapping button, the message of [Operation invalid] may be displayed, but it is not a
malfunction. Because the button operation is set [Invalid] by setting limited operation.
・
For the administrator password which is set at the shipping from the
factory, refer to the installation manual.
When your administrator password is forgotten, initialize the
password by referring to the installation manual.
Note
Notabilia for each setting screen
Содержание ESA30EH2 Series
Страница 2: ... 2 ...
Страница 85: ... 83 MEMO ...
