- 5 -
Modifi cation and installation of
DDP2000.inf
1. Exit DLP Composer Lite v3.6 Setup.exe, if running.
2. Select [Program Files]-[DLP Composer Lite] and open the
fi le named ddp2000.inf using a text editor.
3. Confirm [Device List] in the text file as follows and then
save it.
4. Right-click
the
fi le named ddp2000.inf and select [Install].
Installing the USB support (for all
platforms)
This projector supports the USB communication interface
designed for DDP2000-based projector. The setup program
contains fi les necessary for installation of the USB support. Af-
ter installing DLP Composer (TM) Lite, select [DLP Composer
TM Lite] from the Start menu and select the icon named Install
DDP2000 USB Driver. (The USB support is installed.)
When [Hit any key to continue] is displayed on the screen,
press any key on the keyboard and wait for the installation
process to complete.
Preparation
1. Start DLP Composer (TM) Lite. (The dialog shown below
appears.)
2. Select [Preferences] from the Edit menu.
(The DLP Composer Preferences dialog appears.)
[DeviceList]
; The Vendor ID is 0451, and the Product ID is 2000
"DDP2000 (i00)"=Install, USB\VID_0451&PID_2000&Mi_00
3. Select [Communications] and put a checkmark to [USB].
(Select a port to be used.)
4. Set [Vendor] and [Product].
Vendor
Product
0x451
0x2000
5. Click
[OK].
6. Exit DLP Composer (TM) Lite.
Select [Preferences] from the Edit menu.
1. Select [Communication].
2. Put a checkmark to [USB].
3. Set [Vendor] and [Product].
