EN-26
Installation menu
Installation
Adjust
MENU
Exit
Select
Menu Position
Image Reverse
Auto Power On
Auto Power Off
Auto Keystone
Language
Reset All
Upper Left
Off
Off
English
Off
5Min
Standby Mode
Low
Lamp Mode
Standard
OK
ITEM
SETTING
FUNCTION
Menu Position
5 options
Use this setting to change the position of the menu on the screen.
Lamp Mode
Standard
Select this option when you want to view images in a well-lit room.
Low
Select to moderate the intensity of the lamp. The operating sound is reduced
and the lamp lifetime becomes longer.
• When this mode is switched, projected images may fl icker.
• If this mode is frequently switched, the lamp may be deteriorated.
Standby Mode
Low
Select this option when you don’t use the LAN control, speaker output and
monitor output during power standby. This option disables them and reduces
the power consumption during the power standby.
LAN
Select this option when you control the projector via the LAN during power
standby.
Speaker Out
Select this option when you want to output audio from the speaker during
power standby.
Monitor Out
Select this option when you want to output video signal from the MONITOR
OUT terminal during power standby.
Image Reverse
Off
Select this setting when you want to view images from the front with the
projector set on the fl oor.
Mirror
Select this setting when you want to view images from behind the screen with
the projector set on the fl oor.
Invert
Select this setting when you want to view images from behind the screen with
the projector set at the ceiling.
Mirror Invert
Select this setting when you want to view images from the front with the
projector set at the ceiling.
Auto Power On
On / Off
When this mode is set to On, the lamp is automatically lit when the power
cord is plugged in the wall outlet. Select On when you set the projector at the
ceiling.
• When the lamp is off, the projector is in standby. Use the remote control to
turn on the lamp.
Select this option for use at an altitude of 2000 to 2700 meters above the sea
level.
Auto Power Off
Off / 5-60 Min
Selects a desired timer setting until the projector enters the standby mode
when there is no signal input from the source.
Auto Keystone
On / Off
Select Auto Keystone function.
Language
18 languages
Selects a desired language for the menu.
Reset All
OK
Resets all menu settings except for Password and Language to the default.
• By default, the Lamp Mode is set to Standard. The Lamp Mode is set to either Standard or Low depending on the setting last
selected, and you cannot switch the Lamp Mode in about one minute after the lamp is on.
Menu operation (continued)
