background image

EN-2

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

: TO REDUCE THE RISK OF ELECTRIC 

SHOCK, DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE 

PERSONNEL.

The lightning fl ash with arrowhead symbol within an equilateral triangle is intended to alert 
the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure 
that may be of suffi cient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the 
presence of important operating and maintenance (servicing) instructions in the literature 
accompanying the appliance.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION:

TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, 
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE 
EXPOSURE.

NOTE:

SINCE THIS PROJECTOR IS PLUGGABLE EQUIPMENT, THE SOCKET-OUTLET SHALL BE INSTALLED NEAR 
THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE.

WARNING

Use the attached specifi ed power supply cord. If 
you use another power supply cord, it may cause 
interference with radio and television reception.

Use the attached RGB cable and the shielded LAN 
cable with this equipment so as to keep interference 
within the limits of an FCC Class B device.

This apparatus must be grounded.

DO NOT LOOK DIRECTLY INTO THE LENS WHEN 
THE PROJECTOR IS IN THE POWER ON MODE.

CAUTION

Not for use in a computer room as defi ned in the 
Standard for the Protection of Electronic Computer/
Data Processing Equipment, ANSI/NFPA 75.

The attached power cord is to be used exclusively for 
this product. Never use it for other products.

When using the projector in Europe:
COMPLIANCE NOTICE

This Projector complies with the requirements of 
the EC Directive 2004/108/EC “EMC Directive” and 
2006/95/EC “Low Voltage Directive”.

The electro-magnetic susceptibility has been chosen 
at a level that gains proper operation in residential 
areas, on business and light industrial premises and 
on small-scale enterprises, inside as well as outside of 
the buildings. All places of operation are characterized 
by their connection to the public low voltage power 
supply system.

WARNING

Use the attached RGB cable and the shielded LAN 
cable with thisequipment so as to keep interference 
within the limits of an EN55022Class B device.

Please follow WARNING instructions.

Содержание WD570U





























































Отзывы: